How To Install Hampton Bay Track Lights

Track lighting turned into a popular lighting fixture because of its capacity to be more versatile and also to accentuate areas. It is the easiest to set up because you need not shake holes on your own ceiling. The track is usually mid mounted. Hampton Bay has re-invented track lighting by giving more innovative and more contemporary track layouts rather than the typical bulky track which other track lighting manufacturers grow. So if you are redecorating your house, offer it a small lighting boost by installing Hampton Bay track lighting. You'll Find installing it to be simple, here is how:

Select Your Track Design

Hampton Bay lighting fixtures features many different tracks that you can select from. There are rigid tracks and there are tracks which can be made from flexible material that can be flexed to where you will need to point the track lights. Make sure you choose the track that fits your room design and purpose. Then choose the sort of halogen lighting you can install on the track.

Disconnect The Electric Supply

Turn off the ability at the area or room you're focusing on before installing the Hampton Bay track lighting. Now you can achieve so when you go to a main power panel and choose the circuit of this area and push the lever to"off." Put a sign on the panel to help keep different individuals in your house from turning it on.

Assess Your Track Lighting Materials

Be certain that you bought the comprehensive pair of track lighting. There should be power wires, track bolts, cable caps, the track itself and also the halogen lighting fixtures which will be connected with the track.

Setup The Track Light

If you have an present lighting fixture, use a screwdriver to take it off. On your new path lighting, you could observe multiple coloured wires which you need for connecting into the electric conduit. Make sure you match the colors of the cables and cover each cable with the yellow wire caps.

Mount The Track

Along with a screwdriver, fix the track to the area in the ceiling in which you would like to put in your track light. Connect your track lighting into the conduit electrical box.

Once your track is installed, then slide in the light fixtures by one or if your Hampton track lighting just has to be snapped on the track, snap the lighting fixture one by one depending on the place you want to put the lighting.

Once the lights have been typical snapped or slid right into place, turn the head of the lighting fixture to the direction of the area that you need to give spot lighting.

Turn in your own Hampton Bay lighting. After procuring all wires, tracks and lighting fixtures, turn the electric circuit from the main power panel. Turn on the track lighting and be sure to check that the bulbs are functioning.